Wds-d2100: the whole machine is made of high-quality stainless steel plate, which is durable. The control panel adopts one key start, real-time display of water temperature and intelligent reminder of equipment operation status, which is convenient for operation and maintenance. The conveyor belt is equipped with a soft pressure belt to locate the tableware, prevent the tableware from jumping due to high-pressure water spray and avoid the damage of tableware. Therefore, this model has higher water spray impulse, cleans the tableware, places the tableware mouth downward, and there will be no washing liquid left in the tableware. The upper and lower spray adopts a unique fan-shaped nozzle to realize high-efficiency energy conversion, produce a fan-shaped water knife to spray the tableware surface evenly, and there is no dead angle for cleaning, so as to ensure that the cleaned tableware is clean and bright. The unique air nozzle is used for up and down blowing, and the hot air circulation in the machine is used to produce a high-speed and high-heat air knife, which can blow off and disperse the water droplets of tableware, heat the tableware, promote the evaporation of water vapor on the tableware surface and ensure the drying effect. Hot water circulation, energy conservation and emission reduction. After rinsing the tableware with clean water, it flows into the washing tank for washing and recycling. The oil floating on the water surface of the washing tank is discharged from the overflow. The circulating water is filtered through the filter screen to be purified, reduce the use of purified water and ensure the cleanliness of cleaning. The tableware conveyor belt and upper pressing belt are combined with a grid of unique shape, which can not only realize the slight sliding of tableware and all-round cleaning, but also avoid the wear of tableware. Moreover, the grid can be disassembled separately to facilitate daily cleaning and maintenance.